I actually completed the table around March 2013 but I neglected to update my blog. Here are a couple pictures:
I just found a bunch of pictures of the leg building process, etc:
Here it is in gallery form. Click on an image to see a larger version.
I’ve finally made some more progress with the table. I changed the design a bit. All of the table-top boards will be perpendicular to the long dimension of the table.
I’ve updated the Sketchup model to reflect these changes:
[iframe src=”http://sketchup.google.com/3dwarehouse/mini?mid=72c8fb162c90a716dc6d75c6559b82a2&etyp=im&width=400&height=300″ frameborder=”0″ marginwidth=”0″ marginheight=”0″ scrolling=”no” width=”400″ height=”300″][/iframe] (click on the model to access)
I also detailed how the legs will be built:
[iframe src=”http://sketchup.google.com/3dwarehouse/mini?mid=9649970961fee260dc6d75c6559b82a2&etyp=im&width=400&height=300″ frameborder=”0″ scrolling=”no” marginheight=”0″ marginwidth=”0″ width=”400″ height=”300″][/iframe]
You might wonder why I’m building the legs out of four individual pieces. That’s a lot of extra work!
For a few reasons:
Hardwood is expensive. Cherry isn’t terrible expensive compared to walnut or other more exotic varieties, but making the leg hollow means I need less wood, so it’ll be cheaper.
Hardwood is heavy – I’m just guessing, but I believe the table top will be around 75 pounds. That’s heavy. The legs are 2.5″ square. They will be very heavy if made of solid cherry.
It’s just not possible. Finding solid heartwood cherry that is at least 2.5 inches thick will be nearly impossible, and incredibly expensive.
Instead of doing this I will buy 1″ cherry boards then plane, rip, join, glue, clamp, cut.
So there you have it.
I bought a bunch of rough “5/4″ cherry lumber a couple weeks ago for my table.
I jointed two sides, planed, and tonight I ripped the boards down to the final width + 1/4”
The boards are grouped in twos and this is no accident. I intend to glue-up pairs of two boards initially, and then further group those together to produce two 30″ wide panels and one 12″ panel — the center leaf which is removable.
The final top thickness will be pretty close to 1″
The short: The top is going to be 1″ thick cherry. The legs are trestle style, though quite modern. I can’t honestly take credit for the design as you can buy it (for about $2500) from a major furniture retailer.